Sunday, January 22, 2006

Sycophant Movie

Here is the Sycophant Movie in Windows Media format, filmed this summer but not edited until today.

Friday, January 20, 2006

"Interface" Results

The "Interface" group technological art show opened last Friday night at Fraser Gallery Bethesda.

One of the works in the show, "Look", a collaboration between myself and Scott Hutchison, was featured in the Washington Post Express:



My other work, "Blame" is a robotic arm with a pointing hand that scans back and forth, and when it finds a viewer (with an ultrasonic proximity sensor), it stops and accuses them of some horrible societal issue. Here is Quicktime video of "Blame".



Other artists in Interface included Claire Watkins who does magnetic art. You can kind of make out her work in the near corner here, a powerful rare earth magnet attracting a large number of sewing needles, but they are floating in mid air since each one is also attached to the wall with thin red thread. In the distance you can see "Look" and "Blame" next to each other:



Also featured is David Page who does bondage apparatus performance works. You can read about the performance of his work for the show called "Hopscotch" in a City Paper review. Here is a still from the opening:



I was very inspired by Claire Watkins' magnet work. I have been reading up about rare earth magnets. I think it would be cool to combine powerful permanent magnets with electromagnetic coils driven by modulated current, perhaps from some kind of sensor to provide an even more interactive work.

Philip Kohn's psychadelic time and space shifting mirrors were excellent as well!

Tuesday, January 10, 2006

"Blame" Sneak Preview

Here are the three boards of "Blame." The biggest one (left) has the PIC microcontroller, DTMF decoder chip, and relays. The lower right hand board is an MP3 player, and the upper right hand board is the DC motor controller board.



Here is a sneak preview of the completed "Blame." The ultrasonic proximity detector is under the hand, and on either side of the arm motor are magnetic reed switches (used in home security on windows and such).

Thursday, December 22, 2005

Regulator

I picked up an Analog Devices ADP3338 regulator to power the MP3 player. I am using one with Vin up to 8V, and Vout is 1.8V.

Speed and Detection

I'm enamored with the use of the ultrasonic range sensor for Blame. It currently gives me a very solid indication of anything within 5 feet. The active IR sensors can theoretically detect up to 5 feet, but they really get noisy out beyond 4 feet.

For Look, Scott and I chose passive IR motion sensors because we wanted a larger range, plus Look moves its eyes at motion now, rather than just detection of someone.

For Sycophant, ultrasonic range sensors would have been bad because of 1) clicking noise 2) inter-sensor interference and 3) latency (the ultrasonic sensors need about 0.3 second to get a good reading). Sycophant needs to move down the track really fast when it detects someone, and it is continuously talking.

For Blame, ultrasound works because 1) the clicking is kind of cool and creepy 2) I can turn the sensor off when the work is talking and 3) people might not get too close to the swinging arm, so a long distance is needed and 4) if people crowd around it, the long distance of sensing is less of a problem because it can accuse anyone in the crowd, then move to someone else.

On PWM, currently I am using the 1:4 prescalar on TMR0, with a 4khz internal clock. The on period of the PWM begins at 0xC0. This moves the arm a little fast, but moving the on period to begin at 0xD0 makes the arm a bit weak. I might have to re-jigger the prescalar to 1:2 then drop the on period length to get a solid yet slower movement.

Saturday, December 03, 2005

Ultrasonic Proximity Detectors

A while back I picked up some ultrasonic proximity detectors from BG Micro (they don't seem to have them any more). They appear to be called "Mini-S Sensors", and have one output that detects at 7 feet, and one that detects at 5 feet.

More info on them is here.

Blame progress is coming around nicely. I have a nice steel superstructure now. I picked up some 4066 Quad Switches to control the button switches MP3 player (the strategy appears to work, hurrah!). And am painting the arm of Blame to get a nice image for the gallery postcard.